DIY Project: Techniques to Make an Accent Wall

Accent walls are ideal as the primary or secondary main point in a room as it draws attention. For rooms in the house that contains less architectural interest, accent walls are useful. Convert the accent wall stand out from the rest of the walls in an obvious way but without spending too much money to execute this project. Here are some suggestion to create an accent wall:

Use Paint

To paint the wall with a different color than you’ve used in the rest of the space is the simplest way to create an accent wall. Accent walls are excellent for bold paint colors that can deluge. You can pick on bright or deep color, as anything you prefer.

Use Fabric Wallpaper

You can still create an accent wall using fabric if you’re not permitted to paint or paper the walls if you’re renting your space. Cut the fabric into panels and stick it to the walls using liquid starch. The starch acts like glue to hold the fabric in place once it dries but when you take out the fabric, you’ll find not a single permanent residue. You’ll simply need to wash the walls with a bit of soap and water if in case you’re moving out of the place.

Use Drapery Panels

Differentiate the accent wall with a wall of curtains or draperies long enough to make a softer look than fabric placed with liquid starch. You may also use vintage drapery panels if you can look for at least two to three matching pairs if your wall isn’t too spacious and your ceiling isn’t too lofty. If you can’t find any, try DIY inexpensive version of fabric from a remainder bolt.

Twice as wide as your wall space the least, seam the fabric at once and then hem it on all four sides. To serve a rod pocket, slide over a wall-to-wall curtain wire and add a casing to the back. Gather the header until it’s the width of the wall, and then sew hook-and-loop tape from the other side of the shirred header. Alongside the tip of your accent wall, staple the organizing strip of hook-and-loop tape. To suspend your DIY drape on the wall, grasp the two halves of the tape jointly.

Use Gallery Wall

You can hang a large art grouping to make a gallery wall to create an accent wall without changing the wall’s finish. Hang complimenting frames in a multi-row grid for noticeable effect if you favor a more orderly look.

Use Vintage Wallpaper

A superb wallpaper makes for a striking accent wall even if you’re not into using patterned wallpaper on the entire wall. It’s also a valid way to incorporate vintage wallpaper into your abode. A fragmentary bolt is customarily sufficient for a single wall as it’s challenging finding enough to do a whole room. Try to check  Dallas Epoxy Flooring Service for some fresh ideas.

Sidings Essentials

Any material that is situated on the outer part of the house is known as siding.

Reviewing the Essentials

It’s important to understand the two primary functions of the exterior siding as you start to cover the frame of your home:

  • The first function is to give protection from the natural elements of rain, snow or ice.
  • The second function is to give an aesthetically satisfying appearance that coincides with the rest of the house.

Siding That Gives Protection

For the external part of your home, there are many types of siding you can choose. Materials like wood, brick, and vinyl are just a few, but what’s essential is how well they keep out one of nature’s most common element, no other than water.

For moisture concern, some kinds of siding material provide better help than others and among them are aluminum and vinyl siding. These two kinds of material are ideal for wet climate regions of the country. Other materials please the eyes but are less effective as water barriers just like the function of wood or stone. These are not the best options for your siding because they probably won’t hold up and could develop problems with mold if you have heavy rain in your region. In wet climates, materials like vinyl, aluminum, cement, and brick do work better.

Siding That Gives Satisfying Appearance

It’s important to look at the second function of siding the aesthetic one once you’ve assessed what type of siding is best at handling the elements in your specific climate.

It is a purely subjective choice when choosing a siding material that’s appealing to the eye. While others may prefer cultured stone, some likely homeowners may like the elegant look of brick or the classic look of wood siding.

How Much It Will Cost

It’s important to appraise your choice of siding with your budget as exterior building materials can differ in price. You may want to check Impact Windows Boca Raton for options.

Making a choice can be difficult, especially when you throw in concerns about water resistance and aesthetic value because siding options vary widely in their cost.  Before you buy the material, take time and research the siding options.

Make sure that you don’t just pick a sample from a showroom whether it’s brick, wood or any other product that you’ve picked for your siding material. On how that material will look on a larger scale, go out, explore, and look at examples in your area. By taking a closer look at that chosen material in a larger scene will help prohibit dissatisfaction and expensive replacements later.

 

Brick Flooring: Cons And Drawbacks

The brick flooring material is a classic, durable, and attractive, and has found a variety of uses in both residential and commercial design. The brick material does pose certain challenges when used in indoor flooring. It provides a positive and financially sensible experience with brick flooring when used in your home. However, as helpful and useful as it may be,  there are certain consequences and drawbacks when using bricks as flooring.While brick is commended for its durability, it is certainly hard and that strength comes at a cost. You might not want to stand on it for an extended amount of time as it’s hard enough that your feet might get sore.

Compared to most bare floors, it’s also far more likely to break fragile objects fall on it. Brick isn’t singled out on this aspect as both porcelain and ceramic tiles are equally hard as well.

Consider the weight before installation or using the material. Like tile, unless you reinforce your upper floors, you’ll generally only be able to use the brick material on your first floor due to how heavy it is.

Since brick is a solid hard material, it would be difficult to replace once you’ve decided you’re done with its weathered look.  There is a need to smash the pavers with sledgehammers then leading to scraping them out of the mortar, holding them to your floor. Expect this scenario as there’s no eclectic replacement of pavers the way you would compare to tile. You’ll pay amply for someone who will do the job as it is difficult and you’d rather not do it by yourself.

Like most natural occurring stones, brick is porous. Despite the fact that brick itself is a composite of various minerals and not a natural stone.  Bricks will eventually absorb water and other forms of liquids if you don’t seal it and finish it.

Once bricks flooring is spilled with any liquid, this will to lead to staining, mold will occur, and mildew in no time. It’s a must pay attention to sealing to keep your brick in a supreme state just like concrete flooring.

 

Porch Flooring Suggestions

Cedarwood

Although it is an expensive porch flooring option, cedar-wood is another attractive and natural material. The wood surface covering material does not need use of sealant as it is naturally resistant to mold, rot,  weather, and vermin, and can last for decades once used conventionally.

Resilient Vinyl Click Together

Vinyl is almost resistant to any naturally occurring environmental aspect like vermin, mold, water, and stains. The material is easy to handle as its easy to clean, UV treated by the factory, needs low maintenance, it provides a cheaper convenient outer surface solution. Normally, for porch flooring, available in the form of planks and boards is what you can purchase for the vinyl material, which can be assembled by clicking it together to create a combination of the overall structure.

Plastic Wood Composites

To create a composite that has the properties of both, these consist of recycled plastic mixed with discarded wood fibers. These materials are highly durable and impervious to water, stains, mold, destruction, UV fading, and they don’t chip or break and the appearance is like natural wood. The material is long lasting as it can last for decades with no preservation needed. You have to carefully read the terms and conditions of those contracts as offered by most retailers and they will even offer a 10-20 year warranty on plastic wood composites.

Brick

Bricks are produced from clay fired hard into tiles. Brick is a material that is heavy, and are usually used in porches produced entirely from brick or other stone and concrete solid materials. The floor surface should be treated at least once with a UV shield chemical sealant once installed. Reapplication periodically is suggested, or let the bricks shape and wear with the winds and the rains as it will look messy.

Pressure Treated Pine

This flooring signifies for 80% of all deck floor top coverings. Durable, weather resistant, inexpensive, and long-lasting are the assets of pressure treated pine.  These materials are often utilized to construct the base of a porch and can be purchased in standard 2X planks, and flat sheet board sizes. A simple reminder: When used as the material for railings and stairs, make sure to use better quality grade 1 material and for standard floorboards, use the grade 2 material.

Redwood

Redwood features a lovely red tinted hue and an exotic wood porch flooring option. Redwood will slice down with unsullied linear cuts for sharp junctions and easier to cut compared to pine. These porch floors don’t degrade from normal weathering as they are rough and durable, and they can withstand to the ruins of insects, rot, and mold, that permits eliminating using a wood sealing agent.

 

 

Quality Flooring For Children

It ain’t easy picking the right flooring for children’s bedroom. Safety is the utmost to be considered for the type of material that will be used not only on children’s bedroom but other areas of the house like a living room and even kitchen since most of the time these are the places’ mother and child hang out.

Here are the two most common material recommended being child-friendly flooring.

Cork
For a children’s room cork is a reasonably distinctive choice that can give many of the qualities of carpet, eliminating the disadvantages of the latter. Cork is typically comfy and acquiescent under the feet once installed plus it can be made even comfier by opting for thicker tile materials. This, granting that it resembles quite a bit nearly more solid hardwood.

Cork floors are anti-microbial unlike carpet, and the carpet material will repel inherently the boost of mold and other microorganisms. Creating a room cleaner and healthier the natural way as it is also anti-static and will push back the occupation of dust and dirt. Cork can be made nearly impermeable to stains, and keeping it in its original form is easy with the usual sweeping or vacuuming.

Drawbacks
Since cork is a very soft material it can easily be damaged. Cork flooring is not suitable for pets as their untrimmed nails can damage and destroy the surface of a cork floor. Other sharp materials like plastic children’s toys can also result in slits, tears, and scores in the material. This can counteract to some extent by using cork tiles instead, which can be jot restore as needed.

Carpet
The most traditional choice for flooring in a bedroom is using carpet, it is the usual flooring material on children’s room but any other bedroom. Using carpet flooring is quite deluxe, and spongy, which serves as a cushion resting beneath the entire area. While also helping to eliminate injuries by padding trips and falls, this material gives a tactile comfort to space.

The fact that it can function as an insulating cushion along the entire floor is another benefit of carpeting children’s rooms. This will aid in cutting down on some of the ambient noise that can be created by children stomping, playing, and jumping across the room. When the child’s room is located on upper levels of the home, having that insulating layer of carpet is especially important.

Drawbacks
Expect children to be scruffy. One should be prepared for major cleanups as it is notoriously difficult to keep clean. Carpets are easily getting stains and retains dirt, which signifies that light-colored or solid colors are not a good idea in these spaces. In addition, the fibers in carpet usually attract and hold on dirt and dust, which can give negative effect to the air quality of the area.

 

Baseboards, Casing, and Crown Moldings

Trim boards, also known as molding pieces elegantly cap joints between various surfaces and materials. The casings around windows and doors and base moldings at the bottom of a wall are the most usual applications.

One of the chief characteristics differentiating a lovely room from a plain box is the emphasis on molding. It provides attitude as well as architectural attention for the interior moldings.

One of the simple ways to upgrade a room is to intensify all the moldings, giving emphasis on depth, width, and height to the trim. The enlarged framing adds depth to the walls, especially if it is color patterned with the same hue as the walls for a unified look far from closing in a room.

Baseboards

Baseboards are the visual foundation for a room beginning on the floor. They are a bar outlined below everything else that proceeds into the room. The addition of shoe molding for a dramatic detail is essential if the room has hardwood floors.

Casing

The casing is the openings in walls without doors and is framed with woodwork. This trim protects the wall surface from scratches which wraps from one side of the wall to the other and defines the opening. Without interrupting the flow, a cased opening can suggest a separation between two rooms.

This style frames an opening in a really dramatic and unexpected way. Don’t consider moldings that are too flat against the wall because they look anemic and cheap regardless of the profile.

Crown Molding

A deep crown molding can define the architecture to a room that has less, and it catches the eye upward in a similar way using curtains hung at ceiling height do. Using crown moldings are one of the architectural quality that can suggest your home is well valued. They incorporate a visual existence that makes a home feel posher. One may instantly say this home is well-crafted and solid when installation is done well. Anyone may find themselves the feeling of having incomplete architectural details that give it distinction unless you are lucky enough to live in an older home beautifully arranged with lovely crown moldings.

What To Know About Resilient Flooring

Resilient flooring is also termed as vinyl flooring, a type of flooring generated from carefully chosen natural and synthetic materials. It is a highly engineered composite of polymer materials for today’s resilient flooring.

Vinyl. Comprises the largest part of the resilient flooring market. This consist of the following:

Vinyl Composition Tile (VCT)

Solid Vinyl Tile (SVT)

Luxury Vinyl Tile (LVT).

Linoleum.  This forerunner of vinyl flooring comes from natural product manufactured from materials like wood, cork, linseed oil, resins, and limestone. Mainly to a retro or vintage item is the relevance of linoleum in the present.

Cork. This has become a favored “green” or eco-friendly flooring product as the cork is an organic product produced from thinly sliced cork from trees.

Rubber. This category of flooring is now mainly produced from synthetic rubbers but once produced as organic rubber from rubber trees.  Recycled rubber is sometimes utilized in homes, usually for gym or yoga studio flooring.

Asphalt. Most are not familiar with asphalt flooring.  This is an “obsolete floor surfacing unit ” as termed by RFCI (Resilient Floor Covering Institute).

Polymeric Poured Seamless Floors.  Unlikely used in residential houses and not at any time a DIY-installed material, these floors begins to install as liquid and, this liquid is poured out to form a hard surface upon curing as the name suggests.


What is Not Resilient Flooring?

Every type of floor not on the list above is not considered from the resilient flooring category. This comprises by the following (but is not limited to):

  • natural stone

  • ceramic and porcelain tile

  • laminate flooring

  • solid wood flooring

  • engineered wood flooring

Advantages:

Often obliterate that resilient flooring provides a prominent advantage as most are solid hardwood and natural stone aficionado and these are:

  • Durability: There are several linoleums put up over a century ago is still wearing strong up to this day.
  • Flexibility:  Resilient flooring overpass modest bumps and gaps.
  • Economical: Vinyl -one type of resilient flooring – is constantly the most affordable floor covering anyone can purchase.

Disadvantages:

Not one type of flooring material can be considered as “perfect” because every type of flooring has its own distinctive set of problems.  Resilient flooring just like any other flooring material has set of benefits as well as few disadvantages.

  • Indentation:  Table legs or appliance feet just to name a few small pressure points, that can cause permanent indent on resilient flooring.
  • At variance Value: When it comes to anticipated buyer value, resilient flooring is all over the map.  Anyone can install high-quality, premium luxury vinyl brands even within the sub-category of vinyl or miserably bad (but cheap) vinyl squares that tend to peel away even before they wear down.